HOLESAWS
Description
- 9 piece locksmith set
- M42 Cobolt Bi-metal
- 48mm depth cut
- Solid steel backing plate
- 0.44mm Thin kerf
- Fleem ground teeth
- For wood and metal
- Protective carry case
- 6 bi-metal hole saws: 22, 25, 32, 38, 44 & 54mm
- 2 hex shank Mandrels 5545 & 5514
- 1 Mandrel adaptor 5511
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 14mm/9/16" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 16mm/5/8" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 17mm/11/16" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 19mm/3/4" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 20mm diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 21mm/13/16" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 22mm/7/8" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 24mm/15/16" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 25mm/1" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 27mm/1.1/16" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 29mm/1.1/8" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 30mm/1.3/16" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 32mm/1.1/4" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 33mm/1.5/16" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 35mm/1.3/8" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 37mm/1.7/16" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 38mm/1.1/2" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 40mm/1.9/16" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 41mm/1.5/8" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 43mm/1.11/16" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 44mm/1.3/4" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 45mm diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 46mm/1.13/16" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 48mm/1.7/8" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 50mm diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 51mm/2" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 52mm/2.1/16" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 54mm/2.1/8" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 55mm diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 57mm diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 59mm/2.5/16" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 60mm/2.3/8" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 64mm/2.1/2" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 65mm/2.9/16" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 67mm/2.5/8" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 68mm diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 70mm/2.3/4" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 73mm/2.7/8" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 75mm diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 76mm/3" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 79mm/3.1/8" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 83mm/3.1/4" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 86mm/3.3/8" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 89mm/3.1/2" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 92mm/3.5/8" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 95mm/3.3/4" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 98mm/3.7/8" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 100mm diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 102mm/4" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 105mm/4.1/8" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 111mm/4.3/8" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 114mm/4.1/2" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 121mm/4.3/4" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 127mm/5" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 140mm/5.1/2" diameter
- Cobalt M42 industrial grade steel cutting edge provides shock resistant teeth and resists strippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 48mm depth of cut
- Fleem ground teeth
- Wide slot design on side walls and backing plate for increased visibility while cutting
- 5mm thick heavy-duty backing plate eliminates need for drive plate
- Cuts 30% faster than conventional saws
- Thin kerf design
- 0.044" thickness for faster cutting
- Prolongs batter life when used on cordless tools
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas
- Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications
- Use in steel, aluminium, brass, cast iron, plastic or wood
- 146mm/5.3/4" diameter